Motorola T3 Power Broadband manual Enable line power, Determine which port is being installed

RADIUS network authenticated login

Step 2

Connect 50mm (2”) cable (supplied) between bottom mounted RJ11 port on the MC-802 and the existing RJ11 jack.

Step 3

Attach the MC-802 to the Mounting Adapter using the supplied 6/32 thread forming screws

6/32 thread forming screws

6/32 thread forming screws

Step 4

1.Connect the local AC power adapter to the WallPlate

2.Connect the analog phone to the RJ11 phone jack

Step 5

After WallPlate Link LED is solid, verify the device is connected using the command, “show int dsl status”. It is best to have a technician in the phone room directly connected to the T3 Switch to coordinate and enable Line Power.

Enable line power

Determine which port is being installed

From the CLI, enter this command:
Motorola, Inc.	570510-001-00 rev A	Page 35 of 50