Motorola T3 Power Broadband Commit mode, Reset to Default Configuration, Other Configuration Help

System Administration

Commit mode

T3 OS supports automatic and manual commit modes. When in automatic mode, every command will be executed immediately and saved to memory. The commands will be active if the system is rebooted or power cycled.

In manual mode, commands are executed immediately, but are not saved to memory. The commands will be lost when rebooted if they are not committed.

To change the mode:

system config mode <automanual(mode)>

To commit manual commands to memory:

system config commit

Reset to Default Configuration

From the CLI, enter the following command:

system config default

Note: This command is only available from a local serial login session to prevent accidental default from a network login.

Other Configuration Help

The T3 Command Reference is the master text for all T3 or T3 PowerBroadband configurations. It contains an alphabetical listing of all CLI commands, syntax and example configuration.

The web UI features a context-sensitive help system.

Motorola, Inc. 570510-001-00 rev A Page 25 of 50