Motorola T3 Power Broadband manual Per-WLAN Commands, Monitor the WLANs and radios

Managing the Wireless WallPlates

Per-WLAN Commands

Use the following commands to configure per-WLAN parameters:

Command	What it does
wifi wlan profile add	Create a new WLAN by assigning an SSID as a profile name
wifi wlan profile config	Broadcast SSID:	enable/disable
	Client Isolation:	enable/disable
	Client inactivity timeout: 300-86400 (sec)
	DTIM Period:	1-255
Wifi wlan profile security	None:
	Dynamic-WEP:	(uses 802.1x authentication)
	Static WEP:	Key length, WEP key, Passphrase, Open or Shared
	WPA-personal:	Preshared-key, version (WPA, WPA2, both)
	WPA-enterprise:	version (WPA, WPA2, both), wpa2-pre-authentication

Monitor the WLANs and radios

Use the following commands to monitor the configuration and operational status of the WLANs:

Command	What it does
show wifi wlan	Config:	displays administrative status
	Status:	displays operational status
	Statistics:	displays detailed WLAN statistics. Additional options are
		general, rate, size and qos
show wifi wlan profile	Config:	displays administrative status
	Status:	displays operational status
show interface wireless	Displays operational status of the wireless radio
status
Show interface wireless	Displays detailed statistics of the wireless radio
statistics
show wifi client statistics	Displays information about a connected client including MAC address, WLAN,
	and SSID

Expanded Statistics and Status

Most “show” commands display high level, important information for quick review. To see more detailed status or statistics, specify the actual radio or WLAN. For example;

displays high level status of all active radios	show interface wireless status
displays detailed status of an individual radio	show interface wireless status radio1

Motorola, Inc. 570510-001-00 rev A Page 30 of 50