Additional printer setup

32

Installing an Internal Solutions Port

The system board supports one optional Lexmark Internal Solutions Port (ISP).

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.

1Access the system board.

For more information, see “Accessing the system board” on page 25. Note: This task requires a flathead screwdriver.

2Unpack the ISP kit.

1

4

32

1

ISP solution

2Screws for the ISP solution

3Screw for the plastic bracket

4

Plastic bracket

Page 32
Image 32
Lexmark 34T5012 manual Installing an Internal Solutions Port