Lexmark 34T5012 Power consumption, Product power consumption, Sleep Mode, Hibernate Mode, 332

Notices 332

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Note: Some modes may not apply to your product.

Mode	Description	Power consumption (Watts)
Printing	The product is generating hard‑copy output from electronic inputs.	560 W
Copy	The product is generating hard‑copy output from hard‑copy original	600 W
	documents.
Scan	The product is scanning hard‑copy documents.	85 W
Ready	The product is waiting for a print job.	55 W
Sleep Mode	The product is in a high‑level energy‑saving mode.	11.0 W
Hibernate	The product is in a low‑level energy‑saving mode.	0.5 W
Off	The product is plugged into an electrical outlet, but the power switch is turned	0 W
	off.

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes):

30

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 240 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

•Using the Hibernate Timeout

•Using the Schedule Power modes

•Using the Sleep/Hibernate button

Factory default Hibernate Timeout for this product in all countries or regions

Disabled