Lexmark 34T5012 manual Fax Receive Settings, Understanding the printer menus 185

Understanding the printer menus 185

Fax Receive Settings

Use	To
Enable Fax Receive	Allow the printer to receive fax jobs.
On	Note: On is the factory default setting.
Off
Fax Job Waiting	Remove fax jobs that request specific unavailable resources from the print queue.
None	Note: None is the factory default setting.
Toner
Toner and Supplies
Rings to Answer	Specify the number of rings before answering an incoming fax job.
1–25	Note: 3 is the factory default setting.
Auto Reduction	Scale an incoming fax job so that it fits the size of the paper loaded in the designated
On	fax source.
Off	Note: On is the factory default setting.
Paper Source	Specify the paper source selected to supply paper for the printer to print an incoming
Auto	fax.
Tray [x]
Multi‑Purpose Feeder
Sides (Duplex)	Enable two‑sided (duplex) printing for incoming fax jobs.
Off
On
Separator Sheets	Enable the printer to include separator sheets for incoming fax jobs.
Off
Before Job
After Job
Separator Sheet Source	Specify where the printer will pick the separator sheet.
Tray [x]
Manual Feeder
Output Bin	Specify an exit bin for received faxes.
Standard Bin	Note: Bin 1 is available only when a finisher is installed.
Bin [x]
Fax Footer	Print the transmission information at the bottom of each page from a received fax.
Off	Note: Off is the factory default setting.
On
Max Speed	Specify the maximum speed in baud at which faxes are received.
2400
4800
9600
14400
33600