Troubleshooting

274

Disk near full. Securely clearing disk space.

Try one or more of the following:

Touch Continue to clear the message and continue printing.

Delete fonts, macros, and other data stored on the printer hard disk.

Install a hard disk with higher capacity.

Disk problem

The printer hard disk must be reformatted.

Touch Format disk to reformat the printer hard disk and clear the message.

Note: Formatting deletes all the files stored on the printer hard disk.

Error reading USB drive. Remove USB.

An unsupported flash drive is inserted. Remove the flash drive, and then install a supported one.

Fax memory full

There is not enough memory to send the fax job.

Touch Continue to clear the message.

Fax partition inoperative. Contact system administrator.

The fax partition appears to be corrupted. Try one or more of the following:

Touch Continue to clear the message.

Turn the printer off and then back on to reset the printer. If the message appears again, then contact your system support person.

Fax server 'To Format' not set up. Contact system administrator.

The printer is in Fax Server mode, but the Fax Server setup has not been completed.

Try one or more of the following:

Touch Continue to clear the message.

Complete the Fax Server setup. If the message appears again, contact your system support person.

Fax Station Name not set up

The Fax Station Name has not been entered. Sending and receiving faxes is disabled until fax is configured properly. Try one or more of the following:

Touch Continue to clear the message.

Complete the Analog Fax Setup. If the message appears again, contact your system support person.

Page 274
Image 274
Lexmark 34T5012 manual Disk near full. Securely clearing disk space, Disk problem, Error reading USB drive. Remove USB