Lexmark 34T5012 manual Network Card menu, TCP/IP menu, Understanding the printer menus 149

Understanding the printer menus 149

Reports menu

To access the menu, navigate to any of the following:

•Network/Ports menu > Networks/Ports > Standard Network > Standard Network Setup > Reports

•Network/Ports menu > Networks/Ports > Network [x] > Network [x] Setup > Reports

UseTo

Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.

Network Card menu

To access the menu, navigate to any of the following:

•Network/Ports menu > Network/Ports > Standard Network > Standard Network Setup > Network Card

•Network/Ports menu > Network/Ports > Network [x] > Network [x] Setup > Network Card

Use	To
View Card Status	View the connection status of the network card.
Connected
Disconnected
View Card Speed	View the speed of an active network card.
Network Address	View the network addresses.
UAA
LAA
Job Timeout	Set the amount of time it takes for a network print job to be canceled.
0, 10–255 seconds	Notes:
	• 90 seconds is the factory default setting.
	• A setting value of 0 disables the timeout.
	• If a value of 1–9 is selected, then the setting is saved as 10.
Banner Page	Allow the printer to print a banner page.
Off	Note: Off is the factory default setting.
On

TCP/IP menu

Note: This menu is available only in network models or printers attached to print servers.

To access the menu, navigate to any of the following:

•Network/Ports > Standard Network > Standard Network Setup >TCP/IP

•Network/Ports > Network [x] > Network [x] Setup >TCP/IP

Use

Activate

On

Off

To

Activate or deactivate TCP/IP.

Note: On is the factory default setting.