Lexmark 34T5012 manual Installing the printer on a wireless network Macintosh

Models: 34T5012

1 354
Download 354 pages 60.52 Kb
Page 50
Image 50

Additional printer setup

50

7Temporarily connect a USB cable between the computer on the wireless network and the printer.

Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so you can print wirelessly.

8Follow the instructions on the computer screen.

Note: For more information on allowing other computers on the network to use the wireless printer, see the Networking Guide.

Installing the printer on a wireless network (Macintosh)

Note: Make sure to disconnect the Ethernet cable when installing the printer on a wireless network.

Prepare to configure the printer

1Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

1

2

2Locate the printer MAC address.

aFrom the printer control panel, navigate to:

> Reports > > Network Setup Page > or

> Reports > Network Setup Page

bIn the Standard Network Card section, look for UAA (MAC). Note: You will need this information later.

Enter the printer information

1Access the AirPort options:

Page 50
Image 50
Lexmark 34T5012 manual Installing the printer on a wireless network Macintosh, Prepare to configure the printer