Additional printer setup

40

Removing a printer hard disk

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.

1Access the system board.

For more information, see “Accessing the system board” on page 25. Note: This task requires a flathead screwdriver.

2Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling the cable out.

3Remove the screws that connect the printer hard disk to the system board cage.

Page 40
Image 40
Lexmark 34T5012 manual Removing a printer hard disk