Lexmark 34T5012 manual PCL Emul menu, Understanding the printer menus 213

Understanding the printer menus 213

PCL Emul menu

Use	To
Font Source	Specify the set of fonts used in the Font Name menu.
Resident	Notes:
Disk
	• Resident is the factory default setting. It shows the factory default set of
Download
	fonts downloaded in the RAM.
Flash
	• Flash and Disk settings show all fonts resident in that option. Make sure
All
	the flash option is properly formatted and is not read/write‑, or
	password‑protected.
	• Download shows all the fonts downloaded in the RAM.
	• All shows all fonts available to any option.
Font Name	Identify a specific font and where it is stored.
Courier 10	Note: Courier 10 is the factory default setting.
Symbol Set	Specify the symbol set for each font name.
10U PC‑8	Notes:
12U PC‑850	• 10U PC‑8 is the US factory default setting. 12U PC‑850 is the international
	factory default setting.
	• A symbol set is a set of alphabetical and numeric characters, punctuation,
	and special symbols. Symbol sets support the different languages or
	specific programs such as math symbols for scientific text. Only the
	supported symbol sets are shown.
PCL Emulation Settings	Change the point size for scalable typographic fonts.
Point Size	Notes:
1.00–1008.00
	• 12 is the factory default setting.
	• Point size refers to the height of the characters in the font. One point
	equals approximately 0.014 of an inch. This can be increased or decreased
	in 0.25‑point increments.
PCL Emulation Settings	Specify the font pitch for scalable monospaced fonts.
Pitch	Notes:
0.08–100.00
	• 10 is the factory default setting.
	• Pitch refers to the number of fixed‑space characters per inch (cpi). This
	can be increased or decreased in 0.01‑cpi increments.
	• For non‑scalable monospaced fonts, the pitch appears on the display but
	cannot be changed.
PCL Emulation Settings	Specify the orientation of text and graphics on a page.
Orientation	Notes:
Portrait
	• Portrait is the factory default setting. It prints text and graphics parallel to
Landscape
	the short edge of the page.
	• Landscape prints text and graphics parallel to the long edge of the page.