Lexmark 34T5012 manual Paper jam under the photoconductor units

Clearing jams 258

4Close the front door, and then close the top access cover.

5From the printer control panel, touch Continue, jam cleared.

Paper jam under the photoconductor units

1Ope the printer top access cover.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

2Open the front door.

Warning—Potential Damage: To avoid overexposing the photoconductor units, do not leave the front door open for more than 10 minutes.

3If lodged under the photoconductor units, then firmly grasp the jammed paper on each side, and then gently pull it out .

Note: Make sure all paper fragments are removed.

4If the jammed paper is lodged too tightly under the photoconductor units, then remove the photoconductor units and place them on a flat surface.

Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print quality of future print jobs.