Lexmark 34T5012 manual Finishing menu, Understanding the printer menus 205, Separator Source

Understanding the printer menus 205

Finishing menu

Use	To
Sides (Duplex)	Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
1 sided	Notes:
2 sided
	• 1 sided is the factory default setting.
	• When two-sided printing is selected and the media is not the same on both
	sides, the media must be loaded in the trays in a different orientation.
	• When two-sided printing is selected and the media is not the same on both
	sides, the media must be loaded in the trays in a different orientation.
	• You can set two‑sided printing in the software program. For Windows users,
	click File > Print, and then click Properties, Preferences, Options, or Setup. For
	Macintosh users, choose File > Print, and then adjust the settings from the
	print dialog and pop‑up menus.
Duplex Binding	Define binding for duplexed pages in relation to paper orientation.
Long Edge	Notes:
Short Edge
	• Long Edge is the factory default setting. Long Edge assumes binding along the
	long edge of the page (left edge for portrait and top edge for landscape).
	• Short Edge assumes binding along the short edge of the page (top edge for
	portrait and left edge for landscape).
Copies	Specify the default number of copies for each print job.
1–999	Note: 1 is the factory default setting.
Blank Pages	Specify whether blank pages are inserted in a print job.
Do Not Print	Note: Do Not Print is the factory default setting.
Print
Collate	Stack the pages of a print job in sequence when printing multiple copies.
Off (1,1,1,2,2,2)	Notes:
On (1,2,1,2,1,2)
	• Off is the factory default setting.
	• On stacks the print job in sequence.
Separator Sheets	Specify whether blank separator sheets are inserted.
Off	Notes:
Between Copies
	• Off is the factory default setting.
Between Jobs
	• Between Copies inserts a blank sheet between each copy of a print job if
Between Pages
	Collate is set to On. If Collate is set to Off, then a blank page is inserted
	between each set of printed pages, such as after all page 1's and after all page
	2's.
	• Between Jobs inserts a blank sheet between print jobs.
	• Between Pages inserts a blank sheet between each page of a print job. This
	setting is useful when printing transparencies or when inserting blank pages in
	a document.
Separator Source	Specify the paper source for separator sheets.
Tray [x]	Note: Tray 1 (standard tray) is the factory default setting.
Manual Feeder