Lexmark 34T5012 manual Understanding the printer menus 197, Scan Preview

Understanding the printer menus		197
	Use	To
	Scan Preview	Specify whether a preview will appear on the display for scan jobs.
	Off	Notes:
	On
		• Off is the factory default setting.
		• Appears only when a printer hard disk is installed.
	Allow Save as Shortcut	Enable shortcut creation for FTP addresses.
	On	Note: On is the factory default setting.
	Off
	Background Removal	Adjust the amount of background visible on a copy.
	‑4 to 4	Note: 0 is the factory default setting.
	Color Balance	Enable an equal balance of colors in the output.
	Cyan - Red
	Magenta - Green
	Yellow - Blue
	Color Dropout	Specify which color to drop during scanning, and how much to increase or decrease
	Color Dropout	the dropout.
	None	Notes:
	Red	• None is the factory default setting for Color Dropout.
	Green
		• 128 is the factory default setting for each color threshold.
	Blue
	Default Red Threshold
	0–255
	Default Green Threshold
	0–255
	Default Blue Threshold
	0–255
	Contrast	Specify the contrast of the output.
	0–5	Note: “Best for content” is the factory default setting.
	Best for content
	Mirror Image	Create a mirror image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Negative Image	Create a negative image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Shadow Detail	Adjust the amount of shadow detail visible on a scanned image.
	‑4 to 4	Note: 0 is the factory default setting.
	Scan edge to edge	Specify whether the original document is scanned edge-to-edge.
	Off	Note: Off is the factory default setting.
	On
	Sharpness	Adjust the amount of sharpness of a scanned image.
	1–5	Note: 3 is the factory default setting.