Lexmark 34T5012 Setting the outgoing fax or station name and number, Setting the date and time

Faxing 116

For some countries or regions, a telephone line adapter is included in the box. Use this adapter to connect an answering machine, telephone, or other telecommunications equipment to the printer.

1Connect one end of the telephone cable that came with the printer to the printer LINE port

2Connect the other end of the telephone cable to the adapter, and then connect the adapter to the active telephone wall jack.

Note: Your telephone adapter may look different than the one shown. It will fit the wall jack used in your location.

Setting the outgoing fax or station name and number

1Type the printer IP address into the address field of your Web browser. If you do not know the IP address of the printer, you can:

•View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.

•Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2Click Settings > Fax Settings > Analog Fax Setup.

3In the Fax Name or Station Name field, enter the name to be printed on all outgoing faxes.

4In the Fax Number or Station Number field, enter the printer fax number.

5Click Submit.

Setting the date and time

You can set the date and time so that they are printed on every fax you send. If there is a power failure, then you may have to reset the date and time.

1Type the printer IP address in the address field of your Web browser. If you do not know the IP address of the printer, then you can:

•View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.

•Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2Click Security > Set Date and Time.