Getting Started
To connect your handset to your laptop or other device:
1Open the flap covering the handset’s accessory connector.
flap
2With the handset’s display facing up, insert the data cable’s connector into the accessory connector, until you hear a click.
Using GPS with Map Software
3Insert the data plug into the COM port of your laptop or other device.
Make sure no other application is using the COM port selected.
Make sure the COM port settings of your laptop or other device are set to the following:
•Bits per second: 4800
•Data bits: 8
•Parity: None
•Stop bits: 1
•Flow control: Hardware
To set your handset to send location information to your laptop or other device:
1From the main menu, select GPS > Interface.
2With NMEA OUT highlighted, press A under Change.
3Scroll to On.
4Press A under Select. Your handset is now sending location data to your laptop or other device.
To stop your handset from sending location data to your laptop or other device:
Set NMEA OUT to Off and press A under Select.
79