Motorola Timeport Phone specifications Using Pause Dialing, Using Memory Linking, Press a again

Using Pause Dialing

Once stored, you may recall the entry and place the call. All of the digits you have stored will be recalled, but your phone will only send the tones for the set of numbers before the first pause.

1.Place Enter the two-digit memory location of the

Call	Pause Dialing number and press and hold a
	or press ¾ (or »). Your phone will dial
	the access number and wait for your input
	when it reaches the first pause.

2.Send When the automated system prompts you

More for information, press a or ¾ (or ») to Numbers send the next group of numbers. Repeat this step to send each group of numbers that you

have stored.

3. End	Press ¼, close the phone, or press &
Call	hold a until you hear a high tone and
	press a again.

Using Memory Linking

Each memory location holds up to 32 digits, including pauses. Some automated systems, however, may require you to enter more than 32 digits. If this is required, split the numbers into two memory locations and recall the second set of digits as you need them.

1.Recall 2nd Once you have sent the tones from the Location 1st location, press ä and the two-digit

memory location where you stored the second set of digits.

2.Send Press ä and ¾ (or ») to send the

Tones tones in the 2nd location. If you have stored a pause in the 2nd location, your phone will pause as usual when it reaches the pause character.

Using Memory

47