Moxa Technologies 351 manual 10/100BaseTX Ethernet Port Connection

Manual

RJ45 (10-pin) to DB9(F) Cable Wiring

		RJ45 Plug Pin 1
DCD	1		1	DCD
DSR	2		6	DTR
RTS	3		7	CTS
GND	4/7		5	GND
TxD	5		3	RxD
RxD	6		2	TxD
CTS	8		8	RTS
DTR	9		4	DSR

RJ45 (10-pin) to DB25 (F) Cable Wiring

DCD	1	RJ45 Plug Pin 1
			8	DCD
DSR	2		6	DTR
RTS	3		4	CTS
GND	4/7		7	GND
TxD	5		2	RxD
RxD	6		3	TxD
CTS	8		5	RTS
DTR	9		20	DSR

10/100BaseT(X) Ethernet Port Connection

The 10/100BaseT(X) port located on the VPort 351’s front panel is used to connect to Ethernet-enabled devices.

The following table shows pinouts for both MDI (NIC-type) ports and MDI-X (HUB/Switch-type) ports. We also show cable wiring diagrams for straight-through and cross-over Ethernet cables.

(MDI) Port Pinouts			(MDI-X) Port Pinouts
	Pin	Signal		Pin	Signal
	1	Tx+		1	Rx+
	2	Tx-		2	Rx-
	3	Rx+		3	Tx+
	6	Rx-		6	Tx-

8-pin RJ45

18

- 16 -

Amplicon.co.uk IT and Instrumentation for industry

Sales: +44 (0) 1273 570 220 Website: www.amplicon.co.uk Email: sales@amplicon.co.uk