Moxa Technologies 351 LED Indicators, Power, Mechanical, Environmental, Regulatory Approvals

Manual

LED Indicators
STAT	Indicates if the system booted properly
PWR1	Power 1
PWR2	Power 2
FAULT	Can be configured to correspond to system alarm,
	power failure, video loss, or disconnected network
VIDEO	Video input signal active
AUDIO TEST	Audio input signal in test mode
PTZ	PTZ control signal active
Power
Input	Two 12/ 24 VDC or 24 VAC for redundancy
Consumption	Near 8W
Mechanical
Casing	IP30 protection, metal case
Dimension (W x D x H)	52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in)
Weight	960 g
Installation	DIN-Rail or wall mounting
Environmental
Operating Temperature	0 to 60°C (32 to 140°F)
	-40 to 75°C (-40 to 167°C) for –T models
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Regulatory Approvals
Safety	UL 508
Hazardous Location	UL/cUL Class I, Division 2, Groups A, B, C and
	D (Pending), ATEX Class I, Zone 2, EEx nC IIC
	(Pending)
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), Level 2
	EN61000-4-3 (RS), Level 3
	EN61000-4-4 (EFT), Level 3
	EN61000-4-5 (Surge), Level 3
	EN61000-4-6 (CS), Level 3
	EN61000-4-12
	(Oscillatory wave immunity), Level 3
Shock	IEC60068-2-27
Freefall	IEC60068-2-32
Vibration	IEC60068-2-6
MTBF	160,000 hours
Warranty	5 years
Alarm Features

yPre/Post alarm video recording (9 MB memory)

yVideo motion detection with sensitivity tuning

yDaily repeat timing schedule

yJPEG snapshots for pre/trigger/post alarm images

yAutomatic transfer of stored images by email or FTP with event-triggered actions

yHTTP Action setting for customized alarm messages being sent via HTTP Event Server

PAN/TILT/ZOOM

yPTZ camera control through RS-232/422/485

ySupported devices and protocols:

Dynacolor DynaDome, Pelco D-protocol, Pelco P, Custom Camera

yPTZ driver upload

yTransparent PTZ Control for controlling the PTZ camera with legacy PTZ control panel or keyboard

-20 -

Amplicon.co.uk IT and Instrumentation for industry

Sales: +44 (0) 1273 570 220 Website: www.amplicon.co.uk Email: sales@amplicon.co.uk