Manual
Hardware Reset
A recessed RESET button is provided for restoring the system to the factory default settings. When the system fails to install properly, or operates abnormally, push the RESET button located on the top panel of the VPort 351 to restore the factory defaults.
To restore the VPort 351 to the factory default settings, use a pointed object, such as a straightened paper clip or toothpick, to press the reset button continuously. When the STAT LED blinks in red, release the reset button. At this point, the POST process will run, and the VPort will reboot. The STAT LED will light in green when the VPort has finished rebooting.
Specifications
Video |
|
|
|
|
Video Compression | MPEG4, MJPEG |
| ||
Video Input |
| 1, BNC Connector |
| |
Video Output |
| 1, | ||
NTSC/PAL |
|
| ||
Video Resolution and FPS (Frames per second): |
| |||
| NTSC | PAL | ||
| Size | Max. FPS | Size | Max. FPS |
QVGA | 320 × 240 | 30 | 320 × 288 | 25 |
CIF | 352 × 240 | 30 | 352 × 288 | 25 |
VGA | 640 × 480 | 30 | 640 × 576 | 25 |
4CIF | 704 × 480 | 30 | 704 × 576 | 25 |
Full D1 | 720 × 480 | 30 | 720 × 576 | 25 |
Video Viewing |
| y Adjustable image size and quality | ||
Audio |
| y Timestamp and text overlay | ||
|
|
|
| |
Audio Input |
| 1 | ||
Audio Output |
| 1 | ||
Network |
|
|
|
|
Protocols |
| TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, | ||
|
| DNS, DHCP, UPnP, RTP, RTSP, ICMP, | ||
|
| IGMPv3, QoS (ToS), SNMP (V1/V2c/V3), | ||
|
| DDNS |
|
|
Ethernet |
| 1 10/100BaseT(X) auto negotiating RJ45 port, or | ||
Serial Port |
| 1 100BaseFX fiber port (SC connector) | ||
|
|
|
| |
PTZ port |
| 1, | ||
|
| connector, Max. speed of 115.2 Kbps | ||
Console port |
| 1 |
| |
GPIO |
|
|
|
|
Digital Input |
| 2, max. 8 mA |
|
|
|
| “High”: +13V to +30V |
| |
|
| “Low”: |
| |
Relay Output |
| 2 (max. 24 VDC @ 1A) |
| |
- 19 -
Amplicon.co.uk | IT and Instrumentation for industry |
Sales: +44 (0) 1273 570 220 Website: www.amplicon.co.uk Email: sales@amplicon.co.uk
