International Modem Restrictions | Multi-Tech Systems MT5634ZBAV.92

Appendix C - Regulatory Compliance

International Modem Restrictions

Some dialing and answering defaults and restrictions may vary for international modems. Changing settings may cause a modem to become non-compliant with national telecom requirements in specific countries. Also note that some software packages may have features or lack restrictions that may cause the modem to become non-compliant.

EMC, Safety and R&TTE Directive Compliance

The CE mark is affixed to this product to confirm compliance with the following European Community Directives:

Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of Member States relating to electromagnetic compatibility.

and

Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits:

and

Council Directive 1999/5/EC of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity.

Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide

38

Image 38

Multi-Tech Systems MT5634ZBAV.92 manual International Modem Restrictions, EMC, Safety and R&TTE Directive Compliance

Contents

MultiModemZBA Global MT5634ZBA-Series MultiModemZBA Global MT5634ZBA-Series User Guide Table of Contents Index Products FeaturesIntroduction Features Table Features Products What Is in Your Modem Package Mount the Feet InstallationSafety Warnings Change the Internal Jumpers Changing the Voice Jumper Location of the JumpersChanging the Dial-Up/Leased-Line Jumper Connect the Modem to Your PC Connect the Two-Wire Leased Line Leased Line OnlyConnect the Modem to Your PC Connect the Modem to the Telephone Line Connect a Microphone Voice Option Connect the Modem to the AC Power OutletPower-On Test Connect Speakers Voice Option Removing an Old Modem Driver Install the Modem DriverInstalling the Modem Driver Using AT Commands to Configure Your Modem Configure the Modem for Your CountryUsing the Global Wizard to Configure Your Modem Install Data Communications Software Modem-on-Hold Operation About the Front Panel Leased-Line Operation PhoneTools FeaturesSetup Operation Connecting to the Internet AT Commands, S- Registers, and Result Codes Setup Remote ConfigurationBasic Procedure Changing the Setup Password Turning Callback Security On and Off Changing the Setup PasswordCallback Security Setting Callback Security Message Parity Assigning Callback Passwords and Phone Numbers Number-Entry Callback Calling ProceduresPassword-Only Callback Direct Connection Callback Security CommandsExtension-Entry Callback Callback Assignments Form Modem Does Not Respond to Commands TroubleshootingNone of the Indicators Light Modem Cannot Connect When Dialing Page Modem Disconnects While Online Data Is Being Lost Modem Cannot Connect When AnsweringFile Transfer Is Slower Than It Should Be There Are Garbage Characters on the Monitor Modem Doesn’t Work with Caller ID Fax and Data Software Can’t Run at the Same Time Appendix a Technical Specifications Fax Data Rates Transmit Level Identify the Modem Firmware Upgrade OverviewAppendix B Upgrading Modem’s Firmware Identify the Current Firmware Version Upgrade the Modem’s Firmware Download the Upgrade FileExtract the Upgrade Files Restore Your Parameters Appendix C Regulatory Compliance FCC Part 15 Regulation FCC Part 68 Telecom Fax Branding Statement Canadian Limitations Notice EMC, Safety and R&TTE Directive Compliance International Modem Restrictions New Zealand Telecom Warning Notice South African Statement Appendix D Installing a Modem Under Linux Setup Appendix E Connecting to a Cisco Router Connecting to a Cisco Router Console Port Remote Configuration Console Port Connections Repair Procedures for U.S. and Canadian Customers Appendix F Warranty, Service, and Technical SupportWarranty Repair Procedures for International Distributors Online Warranty Registration Service Replacement Parts Technical Support Index Index