Chapter 2 - Installation

Location of the Jumpers

Jumper for Modem with Voice Option

Changing the Dial-Up/Leased-Line Jumper

As shipped from the factory, your modem is configured for normal dial-up operation. That is, the modem must dial a phone number to connect to another modem. To use the modem on a leased line, you must change jumper J10 to select leased line operation, and J11 to select whether it will be the originating or the answering modem. If dial-up operation is selected, J11 has no effect. See Chapter 3 for additional leased line information.

￿The factory default is the answer position. This makes the modem the answering modem on the leased line.

￿To use the modem on a leased line, move the J10 jumper plug from the default dial-up position to the leased line position.

￿To make the modem the originating modem on the leased line, move the J11 jumper plug to the originate position.

Changing the Voice Jumper

The speaker jumper (J8) is next to the external speaker jack.

￿The factory default position of the voice jumper is set for a stereo speaker or sound card. A jumper plug covers both pins of the J8 jumper.

￿To use the modem with a monophonic external speaker, remove the jumper plug from the J8 jumper pins. You can store it by placing it on one jumper pin.

Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide

9

Page 9
Image 9
Multi-Tech Systems MT5634ZBA-VV.90, MT5634ZBAV.90 manual Location of the Jumpers, Changing the Dial-Up/Leased-Line Jumper