Multi-Tech Systems MT5634ZPW-PCI Nn Error Correction Mode Selection, Tn Inactivity Timer

Owner’s Manual

Command:	\Nn	Error Correction Mode Selection
Values:		n = 0–5, or 7
Default:		3
Description:	\N0	Non-error correction mode with data buffering (same
		as &Q6).
	\N1	Direct mode.
	\N2	MNP reliable mode.
	\N3	V.42/MNP auto-reliable mode.
	\N4	V.42 reliable mode.
	\N5	V.42, MNP, or non-error correction (same as \N3).
	\N7	V.42, MNP, or non-error correction (same as \N3).
Command:	\Qn	Local Flow Control Selection
Values:		n = 0, 1, or 3
Default:		3
Description:	\Q0	Disable flow control (same as &K0).
	\Q1	XON/XOFF software flow control (same as &K4).
	\Q2	CTS-only flow control. Not supported—responds
		ERROR.
	\Q3	RTS/CTS hardware flow control (same as &K3).
Command:	\Tn	Inactivity Timer
Values:		n = 0–255
Default:		n/a
Description:	\Tn	Inactivity timer setting contingent on either \T value or
		S-Register S30 value (e.g., AT\T45&W0<cr>
		configures in parallel ATS30=45&W0<cr>), and vice
		versa.
Command:	\Vn	Protocol Result Code
Values:		n = 0 or 1
Default:		1
Description:	\V0	Disable protocol result code appended to DCE speed.
	\V1	Enable protocol result code appended to DCE speed.
Command:	\Xn	XON/XOFF Pass-Through
Values:		n = 0 or 1
Defaults:		0
Description:	\X0	Respond to and discard XON/XOFF characters.
	\X1	Not supported—responds ERROR.

46 MT5634ZPW-PCI