Multi-Tech Systems MT5634ZPW-PCI owner manual European Low Voltage Directive

Appendices

Except at the edge connector which plugs into the host's expansion slot, clearance distance (Xmm) and creepage distance (Ymm), as given in the above table, must be maintained between the communication card and any assemblies which use or generate hazardous voltage.

This apparatus has been approved for the use of the following facilities:

•Auto-calling

•Loop disconnect and MF dialing

•Phone number storage and retrieval by a predetermined code

•Operation in the absence of proceed indication

•Detection of initial and secondary proceed indication

•Automatic storage of last number dialed

•Tone detection-busy

•Auto clear from the originating end

•Modem

•PBX timed break register recall

European Low Voltage Directive

When correctly installed and maintained, the modem will present no hazard to the user. When correctly installed the modem will be connected to the PSTN or a PW and to a Data Terminal Equipment (DTE), whose modem connections comply with ITU- T recommendation V.28. The DTE connections are therefore taken to be safe voltages (less than ± 30 volts).

Ports which are capable of connecting to other apparatus are defined as SELV. To ensure conformity with EN41003, ensure that these ports are only connected to ports of the same type on other apparatus.

MT5634ZPW-PCI 83