Multi Tech Equipment ISIHI-2S manual 164

Appendix

COMMAND DESCRIPTION

&Zn=x Store Telephone Number n = 0–9;x = dial string

Allows you to store a telephone number in a memory register for faster dialing. To store a number, type &Z, the register number (0–9) where you want to store the number, the = character, and the dialing string you want stored. Then press ENTER. The dialing string can have up to 25 characters. To read a stored number, type AT&Zn? (e.g., AT&Z4?) where n is the number of the register you want to read. To display a list of all numbers stored in memory, type ATL and press

RETURN:

014082345678

116125551212

214089876543

46313551

64258513

816126313550

912138880123

@CONFIG Start ConfigMenu

Starts TA’s internal configuration utility, which you can then use to customize the TA’s configuration for your particular application. You must enter the command while in your communication program’s terminal mode.

@P3=n Parity at Power Up

n = 0–4

Default: @P3=4 (none)

Use only to set the type of parity the TA uses when turned on. Once the TA receives an AT command from the computer, it automatically adjusts to parity the computer is using.

@P3=0 Odd

@P3=1 Even

@P3=2 Mark

@P3=3 Space

@P3=4 None

@P4=n Data Bits

n = 7 or 8

Default: @P4=8 (8 data bits)

Use only to set the number of data bits TA uses when turned on. Once the TA receives an AT command from the computer, it automatically adjusts to number of data bits the computer is using.

@P4=7	7 data bits
@P4=8	8 data bits

@P6=n Stop Bits

n = 1 or 2

Default: @P6=1 (1 stop bit)

Use this command only to set the number of stop bits the TA uses when turned on. Once the TA receives an AT command from the computer, it automatically adjusts to the number of stop bits the computer is using.

@P6=1	1 stop bit
@P6=2	2 stop bits

164 MultiModemISI Hybrid Series, ISIHI-2S