J3 previously Generic Data J-1DN | Multi Tech Equipment MTA128ST

Appendices

J3 (previously 'Generic Data J-1DN')

This ISDN ordering code supports:

•2B Service,

•alternate voice and data on one B, data only on other B channel, and

•One directory number.

J3 is not available on the Northern Telecom switch. Since two directory numbers are required for 2B operation, use J2.

Capability S (previously 'Generic Data M')

This ISDN ordering code is the recommended IOC since it supports the most features for voice and data applications. However, ISDN tariffs in some areas may warrant ordering codes with fewer features (e.g., where there is an additional monthly charge for having voice service on both B channels). If yours is a data only application, you may find Capability R more cost-effective.

Capability S supports:

•2B Service,

•alternating voice/data on each B channel, and

•Two directory numbers.

Applications for Capability S include:

•115.2K or 128K bps data,

•56K/64K bps data with voice or modem support, and

•Generic 1 15.2K/1 28K bps data transfer applications (including remote access and LAN/WAN connectivity and telecommuting).

M5 (previously 'Generic Data M-1DN')

This ISDN ordering code supports:

•2B Service,

•alternate voice/data on each B channel, and

•One directory number.

M5 is not available for services provided with Northern Telecom or AT&T switches. Since two directory numbers are required for 2B operation, use Capability S.

46

Image 46

Multi Tech Equipment MTA128ST manual J3 previously Generic Data J-1DN, Capability S previously Generic Data M

Contents

Page Revision Date Description Model MTA128ST/NT S000305C Rev. CTrademarks Contents Introduction and Description Product Description Isdn BRI Line FeaturesSpid Service Profile ID NT1 Connection Interlace Pin TE SignalPin LED Indicators LED P1 LED P2 LED Command Interface Switch CompatibiltiyLED Indicators Connectors Safety Warnings Hardware InstallationConnecting your TA Connect the TA to Your PC RS-232 Connection Introduction Configuration UtilitiesNetwork Configuration Before You Start Call Control Configuration Voice TEI COM Port Settings Dialing Numbers DCD Drop Time Configuring your TA Page Page Page Page Page Page Page Page MTA128S T/NT Commands and S-Registers AT Commands AT Commands by Function Registers Digital Data Call Commands aAnalog Pots Call Commands Register Summary AT Commands, S-Registers, and Result Codes Using AT Commands to Operate the MTA128ST/NT Result Codes Making a Call Answering a Call Answering Manually Hanging UpAnswering Automatically Troubleshoot ing Troubleshooting the TASpecific Troubleshooting Situations Introduction None of the LEDs light when the MTA128ST/NTis on Debugging/Logging/Troubleshooting CommandsDebugging/Logging/Troubleshooting S-Registers Debugging/Logging/Troubleshooting Command Summary AT MTA128ST/NT does not respond to commands MTA128ST/NT dials but cannot make a connection You can place data calls but not voice calls or vice versa MTA128ST/NT disconnects while online MTA128ST/NT cannot connect when answeringYou cannot place two simultaneous data calls File transfer appears slower than it should be Apple Macintosh Compatibility Software Applications that can Format PPP Data Bonding Using the &, I and + CharactersMaking PPP/MLPPP Connections Dynamic Bandwidth Allocation DBA DBA Features Bandwidth-on-Demand BOD-S60, S61, S62, and S63 DBA Data Protocols PPP/MLPPP Warranty Warranty, Service, and Tech SupportRepair Procedures for U.S. and Canadian Customers Replacement Parts Repair Procedures for International Distributors Quick Setup Factory Profiles AppendixAConfiguration ProfilesQuick Setup Example Appendix B Ordering Your Isdn Li ne Bearer ServiceLoop Qualification Using Isdn Ordering Codes IOCs Capability S previously Generic Data M J3 previously Generic Data J-1DNM5 previously Generic Data M-1DN Ordering Isdn Without IOCs Appendices Appendices AppendixC FCCand Canadian Regulation FCC Canadian Limitations Notice Configuration via AT Commands AppendixD Configuration MethodsFirmware-based Configuration Utility Using AT Commands to Configure the MTA128ST/NT Symbol Glossary Glossary IETFInternet Engineering Task Force PPPMultilink Protocol or MP-is an Internet Glossary TA-Seeterminal adapter Information pages from a central resource. See also Isdn Index Canadian Regulation 56 Appendix Uart