Multi Tech Equipment MTA128ST manual AT Commands by Function

AT Commands, S-Registers, and Result Codes

AT Commands by Function

Command Execution
AT	Attention code
A/	Repeat AT Command
Return or Enter	Command execution
+++AT<CR>	In-band escape code
<BREAK>AT<CR>	Out-of-band escape code
General Information Commands
In	Display Product Information
Ln	List Active Profile Information
!L	Display Network Configuration
>MIBn	Management Information Block (MIB) Information
Network Configuration Commands
**s	User-User Information Element String
%A97=n	Dialing Method
>A0=n	Type of Coding
!C0=n	Network Switch Type
!C6=n	Data SPID
*!C6=n	Voice SPID
!D0=n	V.120 LLC Information Element
!D3=n	SAPI-0 Data TEI
*!D3=n	SAPI-0 Voice TEI
!DNn	Disable Data DN/MSN n
*!DNn	Disable Voice DN/MSN n
!ENn	Enable Data DN/MSN n
*!ENn	Enable Voice DN/MSN n
>MULT=N	Multi-point setting
!Nn=s	Data DN/MSN n
*!Nn=s	Voice DN/MSN n
Serial Port Configuration Commands
&Cn	DCD (Data Carrier Detect) Control
&Dn	DTR (Data Terminal Ready) Control
$Dn	Persistent DTR Dialing
&En	Flow Control
&Mn	Asynchronous Mode
@P3=n	Parity
@P4=n	Data Bits
@P6=n	Stop Bits
&Rn	CTS (Clear To Send) Control
&RFn	CTS/RTS Interaction Control
&Sn	DSR (Data Set Ready) Control
$SBn	Serial Port Speed
%Sn	Serial Port Mode
#Xn	Send Multiple Xoff Characters

General Configuration Commands

@CONFIG Configuration Menu

En	Command Mode Echo
%En	Escape Sequence Options
&Fn	Load Factory Profile
%Mn	Management Mode
Qn	Quiet Mode

26