Multiquip DCA-220SSJ/SSJU - DIAGNOSTIC DISPLAY, up display” function, Setup” menu

DCA-220SSJ/SSJU — DIAGNOSTIC DISPLAY

3. Once the “Setup 1-up Display” menu icon has been 7.	A message indicating the “Single Engine” parameter
highlighted touch the “Enter Button” to access the “Setup	display parameters are reset to the factory defaults will
1-up display” function.	be displayed, then the display will return to the “Custom
	Setup” menu.

GO TO 1-UP DISPLAY STORED CODES ENGINE CONFG

SETUP 1-UP DISPLAY SETUP-4-UP DISPLAY SELECT UNITS ADJUST BACKLIGHT

RESTORED TO

DEFAULTS

4.Three options are available for modification of the 1-Up display.

a). Use defaults- This option contains a set of engine parameters: Engine Hours, Engine RPM. System Voltage, BatteryVoltage, % Engine Load at Current RPM, Coolant Temperature, Oil Pressure.

b). Custom Setup- This option allows for the modification of what parameter, the number of parameters, and the order in which the parameters are being displayed.

c). Automatic scan - Selecting the scan function will cause the 1-Up Display to scroll through the selected set of parameters one at a time, momentarily pausing at each.

5.Use Defaults- To select “Use Defaults” use the arrow buttons to scroll to and highlight “Use Defaults” in the menu display.

8.Custom Setup- To perform a custom setup of the 1-Up Display, use the arrow buttons to scroll to and highlight “Custom Setup” on the display.

USE DEFAULTS

CUSTOM SETUP

AUTOMATIC SCAN OFF

9.Touching the “Enter Button” will display a list of engine parameters.

USE DEFAULTS

CUSTOM SETUP

AUTOMATIC SCAN OFF

USE DEFAULTS

CUSTOM SETUP AUTOMATIC SCAN OFF

10.Use the “Arrow Buttons” to scroll to and highlight a selected parameter (parameter with a # symbol to right of it).

6.Touch the “Enter Button” to activate the “Use Defaults” function.

USE DEFAULTS

CUSTOM SETUP

AUTOMATIC SCAN OFF

ENGINE SPEED	1
PERCENT LOAD AT CURRENT RPM 3
ENGINE OIL PRESSURE	2
ENGINE COOLANT TEMPERATURE

This number indicates the order of display for the parameters and that the parameter is selected

for display.

PAGE 30 — DCA-220SSJ/SSJU— OPERATION AND PARTS MANUAL — REV. #1 (01/06/09)