Multiquip DCA-220SSJ/SSJU - OUTPUT TERMINAL PANEL FAMILIARIZATION, Output Terminal Panel

DCA-220SSJ/SSJU — OUTPUT TERMINAL PANEL FAMILIARIZATION

Output Terminal Panel		Output Terminal Familiarization
The OutputTerminal Panel (Figure 9) shown below is located		The “OutputTerminal Panel ” (Figure 8) is provided with the
on the right-hand side (left from control panel) of the generator.		following:
Lift up on the cover to gain access to receptacles and terminal		■ Three (3) 100/200V output receptacles @ 50 amp
lugs.		■ Three (3) Circuit Breakers @ 50 amps
NOTE	Terminal legs “O” and “Ground”	■ Two (2) 100V GFCI receptacles @ 20 amp
		■ Two (2) GFCI Circuit Breakers @ 20 amps
	are considered bonded grounds.

1Ø AND 3Ø,

■ Five (5) Output Terminal Lugs ( U, V, W, O, Ground)

NEUTRAL GROUND

480 -120 VACTERMINAL TERMINAL OUTPUT TERMINALS

HARD WIRE

HOOKUP PANEL

U V W O

BLACK RED BLUE WHITE GREEN

CIRCUIT BREAKERS

CIRCUIT BREAKERS

FOR GFCI RECEPTACLES

FOR CS-6369 TWIST

LOCK RECEPTACLES

100 VAC, 20 AMP

GFCI RECEPTACLES

ACCESS DOOR

LIFT TO OPEN

RECEPTACLE
AND
CIRCUIT BREAKER
PANEL		Y
	W	X
		CS-6369
		TWIST-LOCK
	AUX. POWER RECEPTACLES
	100/200V, 50 AMPS

Figure 9. Output Terminal Panel

PAGE 40 — DCA-220SSJ/SSJU— OPERATION AND PARTS MANUAL — REV. #1 (01/06/09)