DCA-25SSIU — GENERATOR SHUTDOWN PROCEDURE

18.Observe the generator's ammeter (Figure 52) and verify it reads the anticipated amount of current with respect to the load. The ammeter will only display a current reading if the load is in use.

40

2060

075

A

Figure 52. Ammeter (Load)

19.The generator will run until manually stopped or an abnormal condition occurs.

ENGINE SHUTDOWN

To shutdown the generator, use the following procedure:

1.Switch both the MAIN, GFCI and LOAD circuit breakers (Figure 53) to the “OFF” position.

Figure 53. Main, GFCI and Load circuit breakers

2.Set the engine throttle lever to (low) position.

3.Let the engine cool by running it for 3-5 minutes with no load applied.

4.Turn the ignition key to ‘STOP’ (Figure 54).

Figure 54. Ignition Switch ‘STOP’

5.Remove the load from the UVW terminal strip.

PAGE 46 — DCA-25SSIU — PARTS AND OPERATION MANUAL(STD) — REV. #7 (04/18//12)

Page 46
Image 46
Multiquip DCA25SSIU manual DCA-25SSIU Generator Shutdown Procedure, Engine Shutdown