Outdoor Installation

Install the generator in a area that is free of debris, bystanders, and overhead obstructions. Make sure the generator is on secure level ground so that it cannot slide or shift around. Also install the generator in a manner so that the exhaust will not be discharged in the direction of nearby homes.

The installation site must be relatively free from moisture and dust. All electrical equipment should be protected from excessive moisture. Failure to do will result in deterioration of the insulation and will result in short circuits and grounding.

Foreign materials such as dust, sand, lint and abrasive materials have a tendency to cause excessive wear to engine and alternator parts.

CAUTION

Pay close attention to ventilation when operating the generator inside tunnels and caves.The engine exhaust contains noxious elements.

Mounting

The generator should always be mounted on a flat level surface to isolate vibration of the generator when it is running. DO NOT place the generator on slopes, the possibility exists that the generator could slide.

GA-2.5H — INSTALLATION

Indoor Installation

Exhaust gases from gasoline engines are extremely poisonous. Whenever an engine is installed indoors the exhaust fumes must be vented to the outside. The engine should be installed at least two feet from any outside wall. Using an exhaust pipe which is too long or too small can cause excessive back pressure which will cause the engine to heat excessively and possibly burn the valves.

Eliminate the danger of deadly carbon monoxide gas. Remember that exhaust fumes from any gasoline engine are very poisonous if discharged in a closed room, but harmless if allowed to mix with the outside air. If the generator is installed indoors, you must make provisions for venting the engine exhaust to the outside of the building.

Generator Grounding

To guard against electrical shock and possible damage to the equipment, it is important to provide a good EARTH ground. Always use the ground terminal on the generator to ground the generator.

Article 250 (Grounding) of the National Electrical Code (NEC) provides guide lines for proper grounding and specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

NEC articles 250-64(b) and 250-66 set the following grounding requirements:

1.Use one of the following wire types to connect the generator to earth ground.

a.Copper - 10 AWG (5.3 mm2) or larger.

b.Aluminum - 8 AWG (8.4 mm2) or larger.

2.When grounding the generator (Figure 3) connect the ground cable between the lock washer and the nut on the generator and tighten the nut fully. Connect the other end of the ground cable to earth ground.

3.NEC article 250-52(c) specifies that the earth ground rod should be buried a minimum of 8 ft. into the ground.

GA-2.5H A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #5 (03/04/08) — PAGE 19

Page 18 Page 20
Page 19
Image 19
Multiquip manual GA-2.5H Installation, Outdoor Installation, Mounting, Indoor Installation, Generator Grounding
Page 18 Page 20

GA-2.5H specifications

The Multiquip GA-2.5H is a robust, portable generator designed to meet the demands of both commercial and residential users. Renowned for its reliability and efficiency, it is an ideal choice for construction sites, outdoor events, and emergency power needs. With a compact design, the GA-2.5H is easy to transport, making it a convenient option for those who require power on-the-go.

One of the standout features of the GA-2.5H is its powerful Honda GX160 engine. This four-stroke engine offers a consistent and robust performance, ensuring that the generator can handle various loads without faltering. The engine is also known for its fuel efficiency, allowing users to prolong operational periods and minimize running costs.

The generator provides a maximum output of 2,500 watts, making it suitable for powering essential tools and equipment. Equipped with multiple outlets, including both 120V and 240V options, the GA-2.5H can accommodate various appliances and devices, making it a versatile solution for different power needs.

In terms of durability, the GA-2.5H is built with high-quality materials that can withstand harsh environments. Its heavy-duty frame not only protects the generator components but also ensures stability during operation. Additionally, the unit features a protective circuit breaker that enhances safety by preventing overloads.

Another notable characteristic is its quiet operation. The GA-2.5H is engineered with noise-reduction technologies that significantly lower the sound output, making it ideal for use in noise-sensitive areas. This feature allows users to maintain a peaceful atmosphere, whether at a campsite or a residential neighborhood.

The Multiquip GA-2.5H also incorporates a user-friendly control panel, making it easy for anyone to operate. The panel includes clearly labeled controls and indicators, allowing users to monitor fuel levels, voltage output, and other critical parameters at a glance.

For added convenience, the GA-2.5H comes with a built-in fuel tank that provides extended run times. This larger tank ensures that users can operate the generator for longer periods without the need for frequent refueling.

Overall, the Multiquip GA-2.5H stands out as a powerful, efficient, and portable generator, suitable for a wide range of applications. With its excellent features, durable build, and quiet operation, it is an exceptional choice for anyone in need of reliable power solutions. Whether for construction, emergency backup, or outdoor events, the GA-2.5H delivers performance that users can depend on.
Top Page Image Contents