Multiquip MP150SDLTE, MP200DLTE, MP150SDLTS, MP200SDLSM, MP200DLSM, MP200DLTS Maintenance Engine

Engine Maintenance

The following engine maintenance guidelines are intended to assist the operator in preventative maintenance. For a more detailed maintenance schedule refer to the Deutz Engine Instruction Manual supplied with the pump.

Changing Engine Oil

Change engine oil after first 20 hours of operation. Drain and refill engine crankcase with the correct type and amount oil (reference Table 5) after 250 hours of operation hours or once a week thereafter.

MAINTENANCE (ENGINE)

Figure 14. In-Line Fuel Filter

When draining engine crankcase oil, place oil into a suitable container while engine is still warm. Replace the drain plug tightly. Add oil through the filler hole.

NOTE

When reinstalling fuel filters, please note the arrows indicating the direction of fuel flow.

Changing Oil Filter

Change the Deutz engine oil filter (Figure 13) after 250 hours of operation.

Figure 13. Oil Filter Element

Easy-Change Fuel Filter

Replace the easy change fuel filter (Figure 15) every 500 hours.

Figure 15. Easy-Change Fuel Filter

Fuel Filter System

The Deutz engine fuel system incorporates four different types of fuel filters, in-line, easy change, IMSA, and a fuel water separator.

In-line Fuel Filter

Replace the in-line fuel filter (Figure 14) every 500 hours. If the purity of the fuel being used is of lesser quality replace the in-line fuel filter more often as needed.

Cleaning the IMSA Fuel Filter

1.Close the fuel shut-off valve and loosen the retaining on the IMSA fuel filter (Figure 16).

2.Remove the cover and the fuel strainer.

3.Clean the fuel strainer with diesel fuel. Replace fuel strainer if necessary.

4.Reassemble IMSA fuel filter.

5.Bleed fuel system and check for fuel leaks.

DRY PRIME PUMP — OPERATION AND PARTS MANUAL — REV. #3 (10/06/08) — PAGE 29