![](/images/new-backgrounds/1041925/4192561x1.webp)
14.If the hydraulic oil level is low, remove the cap just above the oil level sight glass (Figure 15) and add the correct amount of hydraulic oil to bring the hydraulic oil level to a normal safe operating level. (Use Shell oil Tellus 68 or Mobil oil DFE26).
Figure 15. Hydraulic Oil Filler Hole
REAR STABILIZER STAND
To reduce excessive vibration and rocking of the
15.Locate both the left and right rear stabilizer stands (Figure 16).
Figure 16. Locatiing Rear Stabilizer Stands
ST-45 PUMP — INSPECTION
16.Remove the cotter pin from the handle tee bolt eye, and then pull the handle tee to release the stabilizer stand (Figure 17).
17.Position both rear stabilizers stands on firm (not loose) level ground (Figure 18).
18.Align the hole on the stabilizer stand with the hole on the frame body and insert handle tee bolt.
19.Insert the cotter pin into handle tee bolt eye to lock the stabilizer stand.
Figure 17. Rear Stablizer Stand
Figure 18. Rear Stablizer Stand Deployment
MAYCO