- The MEMORY indicator must be OFF.

2.Enter one of the following types of programs (see PROGRAMMED DISC PLAY”)

a)Various tracks on several discs

b)All of the tracks on one disc

-The MEMORY indicator lights.

3.Press the REPEAT button (10) twice. - The ONE REPEAT indicator lights.

4.Press the PLAY button (3).

- The PLAY indicator lights

5.Press the “>>I” or I<<” button (7) to select the programmed disc and track to be repeated.

6.The programmed track selected will play repeat- edly until the STOP button is pressed.

7.Press the REPEAT button once more to end repeat play.

Programmed play continues from that point.

8.When the last track has finished playing during programmed play the CD changer will stop.

-The PLAY indicator goes OFF

-The MEMORY indicator remains ON.

NOTE:

If the STOP button is pressed, repeat play will end.

REMOTE CONTROL

The wireless, infrared Remote Control Unit can operate the compact disc changer from a distance of up to 30 feet. The hand-held remote control emits an invisible infrared beam which carries the control sig- nals to the sensor window on the front panel of the compact disc changer. Because the infrared beam travels in a straight line, the emitter on the remote control must be pointed towards the infrared sensor window on the compact disc changer. Make sure that there are no objects between the remote control and the compact disc changer that might obstruct the beam. Refer to the “OPERATION OF THE DIGITAL COMPACT DISC CHANGER” section for detail of buttons whose function are not described in this sec- tion. They function the same as buttons of the chang- er.

Battery Installation

Remove the rear cover of the remote control. Install two AA (R6 or SUM3) size batteries (included) while observing the correct polarity (match the (+) and (-) signs). If the batteries are installed incorrectly, the remote control will not operate and damage may result. Replace the rear cover.

CAUTION:

Remove the batteries from the remote control if is not to be used for a long period of time. Exhausted batteries may leak and damage the remote control.

The Remote Control unit allows extra functions to be selected in addition to those controls on the front panel of the player.

Direct Access to a Track

1.Select a disc number using the DISC NO. button.

2.Select a track number using the TRACK NO. buttons and then press the PLAY button.

GB

NOTE: Track numbers can be designated from “1” to “99”. When the track number which is not con- tained in a disc is designated, the last track of the disc will be played.

Entering A Program

A track number can be entered easily into a pro- gram by using the TRACK NO. buttons instead of the MUSIC SKIP buttons.

-When all the programmed tracks are played through, the player will be set to the programmed playback stop mode.

-When one of the MUSIC SKIP buttons is pressed during the random programmed disc play, the track number will change in the order in which they have been programmed.

Shuffle Play

1.Press the SHUFFLE button either on the player or on the remote control.

-The SHUFFLE indicator will light. 2. Press the PLAY button.

-The PLAY indicator will light and shuffle play will begin.

-When the SHUFFLE button and PLAY button are pressed during the STOP mode, the CD changer’s built-in micro computer will select and play disc tracks at random, until the STOP button is pressed. If tracks have been programmed, the programmed tracks will be played at random.

-When the PLAY button is pressed, shuffle play will end and normal (or programmed) disc play will continue from that point. If a new track number is selected during normal shuffle (not programmed) play will end and normal disc play will continue from that point.

-If a new track number is selected during the shuf- fle play of programmed tracks and the PLAY button is pressed, the new track number will be ignored, shuf- fle play will be cancelled but programmed disc play will continue as before.

Shuffle Programmed Disc Play

1.Enter the program.

2.Press the SHUFFLE button.

3.Press the PLAY button.

NOTE:

-If all the tracks on a disc have been entered as one selection in a program the shuffle play function will select and play one track, and then move on to another disc.

-When all of the shuffle programmed tracks have been played, the CD changer will stop.

-Pressing the “>>I” or I<<” button during the shuffle programmed play changes track numbers in the pro- grammed order.

PREVIEW DISC PLAY

Checking the Contents of All Discs

Press the PREVIEW button and PLAY button to start intro check disc play. The INTRO and PLAY indicators will light.

NAD

7

Page 6 Page 8
Page 7
Image 7
NAD NAD 517 owner manual Remote Control, Preview Disc Play
Page 6 Page 8

NAD 517 specifications

NAD NAD 517 is a cutting-edge audio amplifier that has garnered attention in the audiophile community due to its impressive features and performance characteristics. As part of NAD's commitment to high-quality audio reproduction, the NAD 517 integrates modern technologies to deliver an exceptional listening experience.

One of the standout features of the NAD 517 is its Class D amplification. This technology not only significantly improves energy efficiency but also allows for a lighter, more compact design without compromising sound quality. The Class D architecture enables the amplifier to produce high power output with minimal heat generation, ensuring it runs cool even during extended listening sessions.

The NAD 517 employs a sophisticated digital signal processing (DSP) system that fine-tunes audio signals to match the specific characteristics of various audio sources. This adaptability enhances the overall listening experience, allowing users to discern subtle nuances in their favorite music tracks. The DSP enhances the amplifier’s performance, providing a cleaner, more detailed sound that resonates well across genres.

Moreover, the NAD 517 is equipped with advanced connectivity options, including Bluetooth and Wi-Fi streaming capabilities. This makes it easy for users to integrate the amplifier into modern smart home systems. Users can enjoy seamless connectivity with their devices, allowing them to stream music directly from smartphones, tablets, or computers without the hassle of wires.

Another remarkable characteristic of the NAD 517 is its robust build quality. The amplifier features an aluminum chassis that not only adds aesthetic appeal but also improves durability and reduces electromagnetic interference. The thoughtful design ensures that the performance remains consistent over time, driving the speaker systems with precision.

The NAD 517 also comes with user-friendly controls, simplifying the operation even for those who may not be tech-savvy. With an intuitive interface, users can easily adjust settings, switch inputs, and enhance their audio experience with a few simple taps.

In conclusion, the NAD NAD 517 amplifier stands out as a modern audio solution that merges innovative technology with exceptional sound quality. With its Class D amplification, advanced DSP, versatile connectivity, and durable build, it is an excellent choice for both casual listeners and devoted audiophiles seeking to elevate their listening experience.
Top Page Image Contents