Manuals / NAD / Home Audio / CD Player

NAD NAD 517 owner manual Changing the Tape Length, Changing a Program, Playing a Program

Models: NAD 517

1 52
Download 52 pages 46.15 Kb
Page 9
Image 9

Shuffle Play Edit Mode

1.To play the discs and tracks in random order, press the SHUFFFLE button.

2.Put a tape into the tape deck to record side A. Set the tape deck to the record mode.

3.Press the PLAY button.

-The EDIT indicator remains on.

-The PLAY indicator lights.

-The EACH indicator lights.

-If one half of the length of the tape in minutes is shorter than the playing time of the first track, normal play will start rather than edit play.4. During edit play, press the EDIT button to view the tape length.

-The DISC NUMBER and TRACK NUMBER dis- play will show the tape length for approximately 10 seconds.

5.When all of the tracks to be recorded onto side A have finishing playing:

-The PLAY indicator turns off and the PAUSE indi- cator lights.

6.Put a tape into the tape deck to record side B. Set the tape deck to record mode.

7.Press the PLAY button.

- The PAUSE indicator turns off and the PLAY indi- cator lights.

8. Press the PAUSE button to temporarily stop play.

Press the PAUSE button again, or press the PLAY button to continue.

9.When all the tracks to be recorded onto side B have finished playing.

- The PLAY indicator turns off and the PAUSE indi- cator lights.

10.To record another tape, repeat steps 2-9.

11.Press the STOP button to end edit play. - The PLAY and EDIT indicators turn off.

NOTE:

-The PREVIEW feature cannot be operated during edit play.

-The duration of the blank spaces, recorded between selections programmed in edit play can be reduced as follows: When the current disc and track have finished playing, set the tape deck to the pause mode as the carousel rotates to the next disc. When rotation of the carousel stops, release the pause mode and continue recording.

Changing the Tape Length

Tape lengths of C-1 to C-99 can be selected using the “>>I” or “I<<” button or the remote control’s TRACK NUMBER button.

1.Press the “>>I” or “I<<” button or the remote con- trol’s TRACK NUMBER button(s) to select the required tape length.

-The TRACK NUMBER display will show the tape length.

2. Press the remote control’s EDIT button.

- The DISC NUMBER and TRACK NUMBER dis- plays will show the selected tape length for approxi- mately 10 seconds.

GB

PROGRAMMED DISC PLAY

NOTE: A program cannot be entered during PLAY mode.

ENTERING A PROGRAM USING THE

REMOTE CONTROL.

1.Press the STOP button to clear any previously selected function.

2.Press a DISC NO. (1-5) button to select a disc number.

3.Press the “>>” or <<” button to select a track number.

4.Press the PROGRAM button.

-The MEMORY indicator lights.

-The Time display shows “P-01

-If the PROGRAM button is pressed before a disc number and a track number are selected, track 1 of the displayed disc number is entered as program selection number 1.

The first program selection is now stored in the pro- gram memory.

5.Repeat steps 2-4 to enter additional selections into the program.

6.To enter all of the tracks on a disc, select the disc number with a DISC NO. button then press the PROGRAM button.

- The TRACK NUMBER display shows “ALL”

7.Up to 32 selections can be entered into the pro- gram memory for disc play in any order. If you try to enter more selections, the TIME display shows “FULL” for about 1 second.

CHANGING A PROGRAM

1.Display the selection to be changed by pressing the REVIEW button.

2.Enter a new program selection.

NOTE:

-Track numbers which exceed the highest track on a disc can be programmed, but during play these tracks will be automatically deleted.

PLAYING A PROGRAM

1.Press the PLAY button after entering a program.

2.Programmed play starts from the beginning of the first programmed track.

3.When the programmed play starts, all the entered track Nos. are displayed and the number of the track currently playing blinks.

4.When all of the programmed tracks have been played, the CD changer will stop.

-The PLAY indicator goes OFF.

-The MEMORY indicator remains ON.

-The TIME display shows “P-01”

Example: To play track 5, track 2, and track 8 of disc number 3, in that programmed order:

a)Enter the first track (5) and disc number (3) of the program.

b)Enter the second track (2) of the program

c)Enter the third track (8) of the program

NAD

9

Page 8 Page 10
Page 9
Image 9
NAD NAD 517 owner manual Changing the Tape Length, Changing a Program, Playing a Program
Page 8 Page 10

NAD 517 specifications

NAD NAD 517 is a cutting-edge audio amplifier that has garnered attention in the audiophile community due to its impressive features and performance characteristics. As part of NAD's commitment to high-quality audio reproduction, the NAD 517 integrates modern technologies to deliver an exceptional listening experience.

One of the standout features of the NAD 517 is its Class D amplification. This technology not only significantly improves energy efficiency but also allows for a lighter, more compact design without compromising sound quality. The Class D architecture enables the amplifier to produce high power output with minimal heat generation, ensuring it runs cool even during extended listening sessions.

The NAD 517 employs a sophisticated digital signal processing (DSP) system that fine-tunes audio signals to match the specific characteristics of various audio sources. This adaptability enhances the overall listening experience, allowing users to discern subtle nuances in their favorite music tracks. The DSP enhances the amplifier’s performance, providing a cleaner, more detailed sound that resonates well across genres.

Moreover, the NAD 517 is equipped with advanced connectivity options, including Bluetooth and Wi-Fi streaming capabilities. This makes it easy for users to integrate the amplifier into modern smart home systems. Users can enjoy seamless connectivity with their devices, allowing them to stream music directly from smartphones, tablets, or computers without the hassle of wires.

Another remarkable characteristic of the NAD 517 is its robust build quality. The amplifier features an aluminum chassis that not only adds aesthetic appeal but also improves durability and reduces electromagnetic interference. The thoughtful design ensures that the performance remains consistent over time, driving the speaker systems with precision.

The NAD 517 also comes with user-friendly controls, simplifying the operation even for those who may not be tech-savvy. With an intuitive interface, users can easily adjust settings, switch inputs, and enhance their audio experience with a few simple taps.

In conclusion, the NAD NAD 517 amplifier stands out as a modern audio solution that merges innovative technology with exceptional sound quality. With its Class D amplification, advanced DSP, versatile connectivity, and durable build, it is an excellent choice for both casual listeners and devoted audiophiles seeking to elevate their listening experience.