National Instruments cFP-20xx Physical Characteristics, Environmental, Shock and Vibration, Safety

Physical Characteristics

Screw-terminal wiring. . . . . . . . . . . . . . . . . . . . . . . . . . 16–26 AWG copper conductor wire with

7 mm (0.28 in.) of insulation stripped from the end

Torque for screw terminals. . . . . . . . . . . . . . . . . . . . . . 0.5–0.6 N ⋅m (4.4–5.3 lb ⋅in.)

Weight of cFP-20

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 g (9.8 oz)

Environmental

FieldPoint modules are intended for indoor use only. For outdoor use, they must be installed in a suitable sealed

enclosure.

Operating temperature. . . . . . . . . . . . . . . . . . . . . . . . . . – 25 to 60 °C

Storage temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . – 55 to 85 °C

Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 90% RH, noncondensing

Maximum altitude. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,000 m; at higher altitudes the isolation voltage ratings

must be lowered

Pollution Degree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Shock and Vibration

Operating vibration

Random (IEC 60068-2-64). . . . . . . . . . . . . . . . . . . . . . 10–500 Hz, 5 grms

Sinusoidal (IEC 60068-2-6). . . . . . . . . . . . . . . . . . . . . 10–500 Hz, 5 g

Operating shock (IEC 60068-2-27) . . . . . . . . . . . . . . . . . 50 g, 3 ms half sine, 18 shocks at 6 orientations;

30 g, 11 ms half sine, 18 shocks at 6 orientations

Safety

This product is designed to meet the requirements of the following standards of safety for electrical equipment for

measurement, control, and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 3121-1

• CAN/CSA C22.2 No. 1010.1

For UL and other safety certifications, including hazardous location standards, refer to the product label or to ni.com.