7cFP-20xx Quick Start Guide
©
National Instruments Corporation
IInnssttaallll II//OO MMoodduulleess oonn tthhee BBaacckkppllaannee
A. Align the captive screws on the I/O module with the holes on the backplane.
B. Press firmly to seat the I/O module on the backplane.
C. Using a number 2 Phillips screwdriver with a shank of at least 64 mm (2.5 in.) length,
tighten the captive screws to 1.1 N ⋅⋅m (10 lb ⋅⋅in.) of torque.
D. Repeat this procedure to install additional I/O modules on the backplane.
3