3cFP-20xx Quick Start Guide
©
National Instruments Corporation
Mounting the Backplane on a Panel
A. Fasten the panel-mount plates to the back of the
cFP-BP-
x
using a number 2 Phillips screwdriver
and the 8-32 ×5/16 in. countersink screws
shipped with the kit.
B. Bolt or screw the panel-mount
accessory to a panel.
C. Connect the PE ground
terminal on the cFP-BP-
x
to
safety ground.
NA
TIONAL
INSTRUMENTS
102 mm (4 in.)
260 mm (10.25 in.)
102 mm (4 in.)
457 mm (18 in.)
CCAAUUTTIIOONN Do not use screws longer than
5/16 in. to fasten the panel-mount plates to
the backplane.
CCAAUUTTIIOONN Disconnect
power before removing the
backplane from the panel.
3