
6-1 What comes with this product?
Standard configuration:
•FISH 4432/4433 display unit
•Power cable
•Mounting bracket (screws included)
•Warranty registration card
•This manual
•Sun cover for display unit
•Flush mounting kit
•Dual frequency transom transducer (includes cable kit and screws)
•Transom Mount Transducer Installation Manual.
Mounting bracket
| Screws | |||
|
|
|
| |
|
|
|
|
|
Display unit |
| Power | cable | |
|
|
|
| |
Dual frequency |
|
|
|
|
|
|
|
| |
transom transducer |
|
|
|
|
6-2 Options and Accessories
• TRACKER series of chartplotters | |
• Through hull dual frequency transducer | |
• | Through hull speed/temperature |
| transducer |
• Fuel flow kit (single or twin engine) | |
• | Replacement paddle wheel |
• | SmartCraft Gateway* |
Please consult your Navman dealer for more information.
* Fish 4433 only
• REPEAT 3100 (see section |
several instruments)* |
TRACKER
Fuel flow kit
• Diesel 3200 for fuel flow on diesel engines* |
5430 or 5380 chartplotter
6-3 Mounting and removing the display unit
There are two mounting arrangements:
•Flush mounting requires a solid panel with access behind for wiring and mounting screws. After flush mounting, the FISH 4432/4433 cannot be tilted or moved after installation to reduce any unwanted glare or reflections. Carefully select the best viewing position before installation. This would generally be in a shaded area.
•Bracket mounting requires a panel for mounting the bracket. Ensure that the panel is not likely to deform and is not subject to excessive vibration. The bracket can be tilted and rotated and the FISH 4432/4433 can be removed after each use.
Select a position where the display unit will be:
•At least 4” (100 mm) away from the compass.
•At least 12” (300 mm) away from any radio transmitter.
•At least 4 ft. (1.2 m) away from any antenna.
•Easy to read by the helmsman and crew while underway.
•Protected from physical damage during rough sea passages.
•Easy to access the 12VDCpower source.
•Convenient to route the transducer cables.
31 | NAVMAN | FISH 4432/4433 Installation and Operation Manual |