If you assign a fixed IP address to an NWH660, make sure that all NWH660s within
the same network have IP addresses on the same TCP/IP subnet.
Obtain IP from | Automatically retrieves an IP address for the NWH660 |
DHCP | from a Dynamic Host Configuration Protocol (DHCP) |
| server. This option is enabled by default |
IP Address | Manually assigns an IP address to the NWH660 |
Subnet Mask | Manually assigns a subnet mask to the NWH660 |
Default Gateway | Manually specifies the default gateway IP address (if |
| required) |
If you wish to change the defaults, set each AP to its new IP address before
introducing it on the running network.
Figure 12. Configuration/IP
After making any changes, click the Apply button to make the changes effective
immediately, without closing the dialog box, or click OK to accept the changes and
close the box.
Filter:
The next tab on the dialog box is Filter (Figure 13). This is a
filtering mechanism that prevents the AP from transmitting specified protocols from
