Figure 16. Hardware Diagnosis

Click Start and the tests will commence. As each item is tested, a yellow arrow will appear alongside it. If the test is successful, the arrow will change to a green check mark. If a failure occurs, an “X” will appear. You can click Cancel at any time to stop the tests. When the tests are finished, the Cancel button will change to a Close button. Click Close to return to the Service panel.

Upgrade AP Firmware

From time to time updated firmware is released and may be downloaded from our website at http://www.ndc.com.tw/support/support.htm

The updated firmware may be installed via a COM port using the AP COMFig tool. Click on Upgrade AP Firmware (Figure 9, page 24). The Upgrade AP Firmware dialog box will open (Figure 17).

Figure 17. Upgrade AP Firmware

InstantWave 11-Mbps Wireless Access Point 33

Page 33
Image 33
NDC comm NWH660 manual Upgrade AP Firmware, Hardware Diagnosis