Using the InstantWave Management

System

Once the NWH660 is connected to an Ethernet network, a network administrator can connect to it from any PC on the same network via the InstantWave Management System (IWMS) utility.

The IWMS utility is a Windows-based SNMP management tool allowing network administrators to remotely configure and monitor the NWH660 through both an Ethernet and a wireless connection. To launch the IWMS utility:

step 1. Click Start/Programs/InstantWave/Management System/InstantWave

Management System. The main IWMS window will open. Click Start/Start Hosts View.

Auto-Discovery

This discovery protocol can discover all InstantWave wireless operating devices connected to the Ethernet LAN within the same subnet.

step 1. Click the Auto Discovery icon (a pair of binoculars) on the left side of the Hosts View window. All working InstantWave devices will automatically be discovered (Figure 24).

InstantWave 11-Mbps Wireless Access Point 39

Page 39
Image 39
NDC comm NWH660 manual Using the InstantWave Management System, Auto-Discovery