|
| Figure 32. New/Edit Address |
Two levels of access may be assigned: | ||
|
|
|
| Read | |
|
| except the Access Control settings, but is not |
|
| allowed to alter anything |
| Read/Write | The user may read and alter all settings |
Enter your PC’s IP address and then set your own access rights to Read/Write (see the following note).
Note: Do not set all the stations in the Access Control table to Read only. Once this is set and enabled, it will be impossible to modify the NWH660. Should this situation occur, press the Reset button on the rear of the NWH660 to restore the factory configuration.
To set a stations access rights, enter a station’s IP address and password (the community string is used as a password to access the NWH660) and choose Read or Read/Write.
When a setting is made, click OK. Repeat the procedure for the next PC. When all settings are made, click OK in the configuration dialog boxto make the changes effective.
Trap Server
When the NWH660 is powered on, or an Ethernet port becomes active, an event log will be generated indicating the time, the IP address of the reporting NWH660, and
