Reset

Resetting the NWH660 will take about 30 seconds (Figure 41).

Figure 41. Reset the AP Configuration

During this period, the IWMS program will not be able to query the NWH660 via the SNMP protocol and the NWH660 will not be available to its client stations.

If you try to access the device, the IWMS program will display the message “Timeout! No response from agent . . .”

Load Default

Click Load Default if you want to return the device to its factory default settings. A warning dialog box will open (Figure 42).

Figure 42. Load Default

Click Yes to return the NWH660 to the factory default settings.

Note: The NWH660 will be reset to complete the ‘Load Default’ operation.

Upgrade Firmware

The NWH660’s embedded software is contained in “flash” ROM, and can be updated over your LAN via the IWMS program. To download new embedded software to the device, click Upgrade Firmware. The Upgrade Firmware dialog box will open (Figure 43).

56InstantWave 11-Mbps Wireless Access Point

Page 56
Image 56
NDC comm NWH660 manual Reset, Load Default, Upgrade Firmware