Installation, Relocation, Storage, and Connection
CAUTION
Never attempt to lift the NEC Express server only by yourself.
The NEC Express server weighs up to 44 kg (depending on its hardware configuration). Carrying the server only by yourself may strain your back. Hold the server firmly by its bottom with another person to carry it. Do not hold the front door to lift the server. The front door may be disengaged from the server, causing personal injury.
Do not install the NEC Express server in any place other than specified.
Do not install the NEC Express server in the following places or any place other than specified in this User's Guide. Failure to follow this instruction may cause a fire.
!a dusty place
!a humid place such as near a boiler
!a place exposed to direct sunlight
!an unstable place
Do not connect any interface cable with the power cord of the NEC Express server plugged to a power source.
Make sure to power off the NEC Express server and unplug the power cord from a power outlet before installing/removing any optional internal device or connecting/disconnecting any interface cable to/from the server. If the NEC Express server is
Do not use any unauthorized interface cable.
Use only interface cables provided by NEC and locate a proper device and connector before connecting a cable. Using an authorized cable or connecting a cable to an improper destination may cause a short circuit, resulting in a fire.
Also, observe the following notes on using and connecting an interface cable.
!Do not use any damaged cable connector.
!Do not step on the cable.
!Do not place any object on the cable.
!Do not use the NEC Express server with loose cable connections.