NEC GT1150 user manual Front Terminal Panel Right, L/Mono, coming from the RGB Input 1 source

Front Terminal Panel (Right)

			DVI
1						L/MONO		R
			MONITOR			L/MONO		R
5				OUT
						RGB	2
	RGB
	1
			R/Cr
8	VIDEO	1				G/Y
								B/Cb
	VIDEO					H/HV
9	2		L/MONO
					R			V
10			L/MONO
11					R
						L/MONO
			S-
			VIDEO					R
						AUDIO		OUT

12

1. DVI Connector

This connector can be used to accept digital or analog signal output from a computer with a DVI connector.

2. DVI Audio Input Jacks (RCA)

These are the left channel and the right audio inputs for stereo sound coming from the equipment connected to a computer with DVI output.

L/MONO

This is your left channel audio input for stereo sound from the equip- ment connected to a computer with DVI output.

The L/MONO jack also serves as your monaural audio input.

R

This is your right channel audio input for stereo sound from the equip- ment connected to a computer with DVI output.

3. RGB 2 Connector (Mini D-Sub 15 pin)

Connect your PC, Macintosh, DVD player with Y/Cb/Cr outputs or other RGB equipment. The optional Component V. Cable is required for Y/ Cb/ Cr input connection.

NOTE: The RGB2 connector does not support the Switcher Control mode.

4.RGB 2 Audio Input Jacks (RCA)

L/MONO

This is your left channel audio input for stereo sound coming from the RGB Input 2 source.

This also serves as your monaural audio input.

R

This is your right channel audio input for stereo sound from the RGB

Input 2 source.

5. MONITOR OUT Connector (Mini D-Sub 15 pin)

You can use this connector to loop your computer image an external monitor from either the RGB 1, RGB 2 or DVI analog input source.

2	6. RGB 1 Input Connectors (BNC)
	Connect R,G,B,H (Horizontal sync) and V (Vertical
4	sync) outputs of external equipment such as the NEC
	ISS-6020Switcher.
	If using a component with a combined sync (SYNC)
3	output, connect it to the H/V terminal. When using
	luminance and color-difference signals of HDTV and
	DVD, connect Pr/Cr to the R,Y to the G and Pb/Cb
	to the B input of the projector.

6	7. RGB 1 Audio Input Jacks (RCA)
	L/MONO
	This is your left channel audio input for stereo sound
	coming from the RGB Input 1 source.
7	This also serves as your monaural audio input.
	R
	This is your right channel audio input for stereo sound

from the RGB Input 1 source.

13

8. VIDEO 1 Input Connector (BNC)

Connect a VCR, DVD player, laser disc player, or document camera here to project video.

9. VIDEO 2 Input Connector (RCA)

Connect a VCR, DVD player, laser disc player, or document camera here to project video.

10.VIDEO Audio Input Jacks (RCA)

L/MONO

This is your left channel audio input for stereo sound coming from the VIDEO 1 or VIDEO 2 source.

This also serves as your monaural audio input.

R

This is your right channel audio input for stereo sound from the VIDEO

1or VIDEO 2 source.

11.S-VIDEO Input Connector (Mini DIN 4 pin)

Here is where you connect the S-Video input from an external source such as a VCR or laser disc player.

NOTE: S-Video provides more vivid color and higher resolution than the tradi- tional composite video format.

12.S-VIDEO Audio Input Jacks (RCA)

L/MONO

This is your left channel audio input for stereo sound coming from the S-VIDEO source.

This also serves as your monaural audio input.

R

This is your right channel audio input for stereo sound from the S- VIDEO source.

13.AUDIO OUT Jacks (RCA)

You can use this connector to output sound from the currently selected input source (RGB 1, RGB 2, VIDEO 1, VIDEO 2, S-VIDEO or DVI [digital/analog] ). Output sound level can be adjusted in accordance with the sound level of the internal speaker.

E – 6