NEC GT1150 When Used with One Switcher ISS-6020/ISS-6020G, BNC 5 coaxial cable, To REMOTE1

When Used with One Switcher (ISS-6020/ISS-6020G)

Up to 10 input signals can be accepted when the projector is connected to one Switcher. Using the projector with the Switcher allows easy adjustment and signal selection.

MONITOR OUT RGB 2

BNC 5 coaxial cable

RGB 1	R/Cr		G/Y	B/Cb
VIDEO 1			H/HV	V
	L/MONO	R	L/MONO
VIDEO 2
	L/MONO	R	L/MONO	R

S VIDEO AUDIO OUT

ISS-6020

To RGBHV output

To slot

VCR

VCR

Personal computer

IN IN To REMOTE1 To audio output

Personal computer

PC CONTROL	REMOTE
	2
OUT	OUT
REMOTE 1	SC, TRIGGER

Optional control cable 15p-15p (CTL-6010)

To audio input

Audio system

•Select [Advanced Menu] → [Projector Options] → [Switcher Control] → [SW1 Level]. See page E-49 for the information in detail.

•For more information on the Switcher, refer to the user’s manual accompanying the ISS-6020/ISS-6020G Switcher.

•All cables mentioned above are sold separately.

•The RGB2 terminal will not work with the Switcher Control function.

To use the projector with the Switcher ISS-6020 in the Switcher Control mode,

*When connecting with the VIDEO INPUT MODULE (6020-VID), set the VIDEO MODE select switch (S3001) to "8". The VIDEO MODE select switch is located on the VIDEO INPUT MODULE (6020-VID).

NOTE: While in the Switcher Control mode, a video standard is selected at the projector.

*If you set the VIDEO MODE select switch (S3001) to "8" with the QUAD DECODER installed in the Switcher ISS-6020, the image will not be displayed correctly.

In that case, first remove the QUAD DECODER from the Switcher ISS-6020.

For more details, contact your dealer.

E – 28