Setup
Enables you to set operating options.
Press "OK" to save your changes for all the features of Page1, Page2, Page3, Page 4, Page5 and Page6.
[Page 1]
Orientation:
This reorients your image for your type of projection.
The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection.
Background:
Use this feature to display a blue/ black screen or logo when no signal is available. The default background is blue. You can change the logo screen using the PC Card Files feature. See page
PC Card Viewer Options Show Folder List:
If this option is checked, when PC Card Viewer input is selected on the projector, the folder lists will be displayed and allows you to select the presentation from a PC card.
Auto Play:
If this option is checked, any given slide will start to play automati- cally.
Auto Play Interval:
You can specify interval time between 5 and 300 seconds.
NOTE: The Auto Play Interval time set on the PC Card Viewer Utility over- rides the one set here.
Manual Play:
Views a slide manually when PC Card Viewer input is selected. NOTE: The Auto Play and Manual Play options determine the behavior of the Play/Stop [ 
/ 
] icon on the Viewer toolbar.
NOTE: If you check "Auto Play" and select "PC Card Viewer" on the projector, the slides will automatically start to play back from any given slide.
Capture Options: (available for JPEG only)
These options are used for the Capture function that you can select from Tools. You have three options for JPEG compression quality: High quality, Normal and High Compression.
High Quality | Gives quality of JPEG a priority. |
Normal | Gives normal JPEG quality. |
High Compression | Gives compression a priority. |
[Page2]
Signal Select
RGB1/2:
Allows you to choose "RGB" for an RGB source such as a com- puter, or "Component" for a component video source such as a DVD player. Normally select "Auto" and the projector automatically detects a component signal. However there may be some compo- nent signals that the projector is unable to detect. If this is the case, select "Component".
VIDEO 1/2 and
This feature enables you to select composite video standards manu- ally.
Normally select "Auto".
Select the video standard from the
E – 47
