NEC GT1150 user manual REMOTE 1 Connector, Pin No, Function, Shield frame ground

REMOTE 1 Connector

5		4	3	2	1
10		9	8	7	6
15	14		13	12	11

This connector is used for either connecting the ISS-6020/ISS-6020G Switcher or a third party external control device. When the Switcher is used, connect it with the optional control cable (15-15 pin; 50 ft./16m; CTL-6010) to this connector.

When used with the Switcher.

Pin No.	FUNCTION
1, 2, 6 and 7	Sending and receiving data when the Switcher is used.
9	Identifying the Projector
15	Ground
8,11 and 12	Used inside the Projector. Normally set to OPEN.

When using with the Switcher ISS-6020/ISS-6020G, connect No. 1,2,6,7,9 and15 pins of the projector to the same No. pins of the switcher as shown below.

Pin Configuration of Optional CTL-6010 Cable

REMOTE 1 connector of the Projector mini D-sub 15 pin (female)

REMOTE 1 connector of the Switcher mini D- sub 15 pin (female)

6

1

7

2

Shield (frame ground)

6

1

7

2

9

15

9

15

Pins without a number are open.

E – 31