Help
Contents:
Provides an online help about how to use the menus. An under- lined link means that you can move to an adjustment item directly. Selecting the underlined link and pressing ENTER moves to the corresponding adjustment item.
NOTE: The Help Menu may not be displayed correctly when a UXGA signal is displayed.
Information:
Displays the status of the current signal, and the lamp and the pro- jector usage hours.
This dialog box has six pages.
[Page 1] | [Page 2] |
Source Name | Signal Type |
Input Terminal | Video Type |
Entry No. | Sync Type |
Horizontal Frequency | Interlace |
Vertical Frequency | Resolution |
Sync Polarity | Direct Key (See also page |
[Page 3] | [Page 4] |
Aspect Ratio (IN/OUT) | Lamp Remaining Time (%) |
Gamma Correction | Lamp Hour Meter (H) |
Noise Reduction | Filter Usage (H) |
Color Matrix | Projector Usage (H) |
Matrix Type | Projector ID |
NOTE: The progress indicator shows the percentage of remaining bulb life. The value informs you of the amount of lamp, filter and projector usage respectively.
[Page 5]
Version
[Page 6]
Link Mode:
Displaying Current Status of Link Mode
When selecting the tab "Page 6 ", you will get the following dialog box.
Master ID | Indicates the Master projector |
Status | Indicates the status of the master projector |
Connected PJ | Indicates number of connected slave projectors |
Slave No | Indicates serial number of the slave projector |
ID | Indicates ID of a slave projector |
Status | Indicates the status of the slave projector |
Page buttons | Turns pages. One screen displays information of 3 |
| projectors only. Information of a maximum of 16 |
| projectors can be displayed using these page but- |
| tons. |
Reconnect button | Confirms connection of all linked projectors |
Status items: |
|
Running | The projector is now working |
Cooling Lamp | The fan is now cooling the lamp |
Standby | The projector is in |
Communication Error . A communication error has occurred | |
Connecting | The projector is now verifying for connection |
Error Standby | An error caused the projector to enter the |
| mode |
Test Pattern
Nine test patterns can be selected.You can turn on or off red, green, or blue respectively.
E – 51